Land Rover 3.6 & 4.4 TDV8 / SDV8
Front Crankshaft Oil SealFits models: Range Rover & Range Rover Sport
Engine Codes: 368DT & 448DT
OEM Number: 1102415
PLEASE READ THIS FITMENT GUIDE BEFORE ASSEMBLY! CLICK HERE
* Important fitting information *
1. Only remove PTFE oil seals from their protective packaging immediately before installation, to protect them from dust and other contamination.
4. Both the PTFE sealing lip and the shaft surface must be completely dry. Do not use any grease or oil.
The most frequent cause for failure is damage to the PTFE sealing lip during assembly. If the seal is installed without the help of a sleeve or special tool and is shifted or even turned inside out, reliable sealing will hardly be possible. Similarly, the use of oil or grease – as with classical oil sealing rings – will result in total failure of the PTFE oil seal immediately after installation.
If you require any assistance or would like to ask any questions, please click below
|Land Rover||Range Rover||Diesel - 3.6 3628cc||2006 - 2012|
|Land Rover||Range Rover||Diesel - 4.4 4467cc||2010 - 2020|
|Land Rover||Range Rover Sport||Diesel - 3.6 3628cc||2006 - 2013|
|Land Rover||Range Rover Sport||Diesel - 4.4 4467cc||2013 - 2020|
|Engine Codes||368DT 448DT|
|Engine Size||3628cc 4367cc|
|Engine Type||V8 32v Turbo Diesel|
|OEM Part Number||1102415|
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: